FB19-2394-02 - Fimotec-Fischer Estonia Sales

BRAND	Fimotec-Fischer
Product	FB19-2394-02
Description	Supply and supply station for rivet nut RSN0609D07A, 1 type, WITHOUT active separation
Internal code	IMP4890536
Technical specification	Supply and supply station consisting of: 1 bunker supply system type BZS 30 for filling the supply device as required, with swiveling product Storage bunker built on a noise protection jacket. Execution as Plastic housing with hinged transparent cover for control access. “Maintenance cover” secured with twist handle. Capacity: approx. 12 liters Filling weight: max. 50 kg Storage: approx. 6,000 products Drive motor: 230V three-phase asynchronous motor BZS paint: Lower part: RAL 7035 Connector: orange Upper part: black Includes Makrolon lid that can be folded back and secured with a chain. Includes gas struts. Incl. opt. Sensor for monitoring the level in the bunker, Fabr. Balluff, Type BOS26KPA1HC-S4C, including fender. Including sensor for the opening status of the BZS, mounted on the BZS base, Fabr. Balluff, type BESM08EHPSC20B-S04G. Without control unit, the control must be powered by a single-phase Frequency inverters with 3x 230V output voltage. 1 vibration feeder VZ-20/PK-300 with oscillating tray (approx. Ø 300 mm), ready for use, set up for the correct Supply of the previous ones. products. Running direction: counterclockwise Coating: without, polyamide blank Number of tracks: 1 piece Outlet: 1 piece, inclined Backflow protection: sensor-dependent shutdown of the supply device by a Sensor on the customer-side traffic jam Conveyor position: standing on the large Ø, smaller Ø facing upwards, without without further orientation Oriented products are produced directly after the Organizing elements with a sturdy cover to prevent tipping secured. If it is the product dimensions/geometry as well as the Tolerances are allowed at the inlet below this Covering wrongly lying products by means of a Harassing/backdrop (“Poka Yoke”) held back. These products must be removed manually! Due to possible backlogs, products must not be removed from the Swing bowl fall. Conveying rate: 18 products/minute System cycle: 4 seconds Filling volume: depending on the material to be conveyed Rated voltage: 230 V AC Vibration frequency: 50 Hz/100 Hz — 10% Incl. optical sensor, color Balluff, type BOS26KP1HC-S4C, for Level measurement in the vibrating bowl. Without control unit. 1 drain piece The products are blown off vertically downwards in a curved piece. Includes hose clamping with 2 angled claws. Includes pneumatic air supply connection for the blowing process 1 rectangular tube Length approx. 10 m, is provided free of charge by the customer. 1 electrical installation Actuators and sensors with loosely enclosed, 5 m long, connection cables for additional customer-side control. 1 Assembly structure all previous ones. Modules on a rectangular aluminum plate (650 x 500 x 20 mm) to a compact and function-tested unit. Including design, documentation and approval. Without pneumatic valves, without process control (SPS), without protective housing in accordance with BG regulations. Power grid shape: 230/400 V/50 Hz with center and neutral conductors Control voltage: 24 V/DC Compressed air connection: unoiled compressed air, min. 5 bar Paint: RAL 7035 textured paint satin/ stainless steel, polyamide, bare aluminum

Please Contact Us to Order to offer competitive prices and delivery time for Fimotec-Fischer - FB19-2394-02 Supply and supply station for rivet nut RSN0609D07A, 1 type, WITHOUT active separation number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Estonia Industrial products Market.

WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.