| BRAND | Epro (Emerson now) |
| Product | MMS6312 |
| Description | Dual Channel Rotational Speed & Key Phasor Monitor |
| Internal code | IMP347824 |
| Weight | 1 |
| Technical specification | (for use in the IMR 6000/10 chassis) Or equivalent Technical data: Power supply: Supply voltage: 18....24....31.2 V DC according to IEC 654-2, class DC4 Power consumption: max. 6 W (max. 250 mA at 24 V) Sensor Inputs: Number of inputs: Two, independent, Type of inputs: Eddy current differential, Input resistance: >100 kΩ, Input voltage range: 0 to ±27.3 VDC, Input frequency range: 0 to 20,000 Hz, 65,535 RPM Measuring Range: Range: Continuously adjustable with the configuration software, Smallest range: 2 V, Largest range: 0-30 V, Sensor power supply: Separate buffered sensor supply Galvanically separated from all system voltages and system supply voltage Open and short circuit proof, Nominal voltage: -26.75 VDC, Available current: Nominal 20 mA, maximum 35 mA. Analysis: Measurement modes: Hot configurable, Speed measurements with each channel: Forward and reverse rotation with trigger wheel (1 to 255 trigger marks), max. freq. 20 kHz, Pulse width time window: 5 to 10 msec, Key pulse detection with each channel: One key mark on the shaft Possible with multiple key marks, but phase will change with each start-up, Zero speed monitor with each channel: Detects zero speed of trigger wheel with 1 to 255 trigger marks Measures time between two pulses in a configurable range of 1 to 1700 seconds, forward or reverse direction, Both channels in combined use: Detects direction of rotation of two trigger marks of which one is phase shifted Detects a difference between the speed of two trigger wheels, difference adjustable in number of RPM.Rear Outputs Available: Current mode outputs: 0/4-20 mA output for each channel proportional to main value Open/short circuit proof, Permissible load: <500 Ω, Accuracy: ±1% of full scale, Settling time: configurable, 0 to 10 seconds, Pulse Outputs: 0 Hz-20 kHz output for each channel Open/short circuit proof, Permissible load: >10 kΩ, TTL Pulse Output: 0 Hz-20 kHz output signal for each channel, 0-20 kHz Open/short circuit proof, Permissible load: >10 kΩ. (for use in the IMR 6000/10 chassis) |
Please Contact Us to Order to offer competitive prices and delivery time for Epro (Emerson now) - MMS6312 Dual Channel Rotational Speed & Key Phasor Monitor number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Estonia Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
CURRENT Dİ SPLACEMENT SENSOR, MEASURİNG RANGE :-2……+2 MMSENSİ Tİ Vİ TY:4 V/MM, FREQUENCY RANGE: 0-12KHZ HEAD DİAMETER:18 MM, BUSHİNGTHREAD:18X1,5, TEMPARATURE RANGE :-35…..+180C
sensor
sensor
VIBRATION SENSOR
EPRO GMBH P/N# 9100-00013/PR6423 EPRO GMBH MODEL#MMS3210 EPRO GMBH 9100-00013-03
8MM PROBE ±1MM M10X1, 25MM, 1+3M +ADAP NO ARMOR LEMO
Speed Turbine Convertor
current displacement sensor
sensors or signs of Speed Turbine
(vibration sensor)
for signs of TRT and Vibration Generator
PR6423-000-131-3924 - NOT A VALID PART NUMBER - SIMILAR PRODUCT PR6423-000-131
sensor with con 41 cart
SCALA RANGE: -2 - 0 + 2 MM, SENSITIVITY: - 4 V/MM, CONNECTION CABLE: 4M LONG, ORDER NO: 5010/3-5-95,DIMENTION: 59 x 75 x 100 MM
Sensor Poison SHAFT KKs No. MAD20CY011
16MM PROBE ±2MM M18X1.5, 40MM, 4M NO ARMOR LEMO
16MM PROBE ±2MM M18X1.5, 50MM, 4M ARMOR LEMO
eddy current displacement sensor
Mechanical velocity sensor
Vibration sensor, VERTICAL
vibration sensor, HORIZONTAL
SN 1337
